KCR2 plug in control

                                                                                     Click icons for details and prices
undefined

The KCR2 is a break through in controller design.
It is quite unique in that it has its own 13 amp socket outlet with means it can be fitted to any kiln that presently uses a 13amp plug. Type of kiln and application will vary, so, it is wise to contact us for suitability. For instance, to fit to an existing enamelling kiln, insert the KCR2 thermocouple into the kiln, plug the kiln into the KCR2 and the plug the KCR2 into any 13 amp socket outlet.

 KCR1 package

The controller can be purchased with a U.K. 13 amp socket outlet front, any European socket front, or, for tradition wiring to the kiln, it can be fitted with an on off rocker switch front.

The KCR2 has been designed for ease of use. There are no menus or masses of buttons to confuse!
All values are accessed using the step (black) key, adjustments are done using the up and down (blue) keys and the controller is started and stopped using, the start/stop (green/red) key. Simple.

Whilst the KCR2 is controlling the kiln, it shows the kiln temperature, whether the kiln is heating or cooling, the present segment number and if the kiln is running or not.

The control has 9 fully adjustable program, each program has 9 adjustable segments, each segment consists of a rate of climb/cool, a target temperature and a hold time.
A start delay can be entered.

There is a pause feature the enables the user to "freeze" the temperature at any given time during the process. Whilst the controller is in pause mode the display alternates between the kiln temperature and "PAUSEd". An audible sounder also beeps every minute or so as a reminder that the kiln is paused.

The KCR2 will show how much electricity has been used during the present/last firing.

Whilst firing the controller can be forwarded to the next segment if required.

The KCR2 can be used in degrees C or F.

The KCR2 has all the usual safety features such as broken thermocouple detection and various kiln fault alarms.

A 150mm x 3mm M.I. type K thermocouple is included in the package.

KCR2 stand
KCR1 and stand

The KCR2 stand enables the KCR2 to sit at a comfortable angle on a bench to or to be fixed to the wall.

 

 

KCR1 package
The KCR2 is a break through in controller design.
It is quite unique in that it has its own 13 amp socket outlet with means it can be fitted to any kiln that presently uses a 13amp plug. Type of kiln and application will vary, so, it is wise to contact us for suitability. For instance, to fit to an existing enamelling kiln, insert the KCR2 thermocouple into the kiln, plug the kiln into the KCR1 and the plug the KCR2 into any 13 amp socket outlet.

The controller can be purchased with a U.K. 13 amp socket outlet front, any European socket front, or, for tradition wiring to the kiln, it can be fitted with an on off rocker switch front.

The KCR2 has been designed for ease of use. There are no menus or masses of buttons to confuse!
All values are accessed using the step (black) key, adjustments are done using the up and down (blue) keys and the controller is started and stopped using, the start/stop (green/red) key. Simple.

Whilst the KCR2 is controlling the kiln, it shows the kiln temperature, whether the kiln is heating or cooling, the present segment number and if the kiln is running or not.

The control has 9 fully adjustable program, each program has 9 adjustable segments, each segment consists of a rate of climb/cool, a target temperature and a hold time.
A start delay can be entered.

There is a pause feature the enables the user to "freeze" the temperature at any given time during the process. Whilst the controller is in pause mode the display alternates between the kiln temperature and "PAUSEd". An audible sounder also beeps every minute or so as a reminder that the kiln is paused.

The KCR2 will show how much electricity has been used during the present/last firing.

Whilst firing the controller can be forwarded to the next segment if required.

The KCR2 has all the usual safety features such as broken thermocouple detection and various kiln fault alarms.

A 150mm x 3mm M.I. type K thermocouple is included in the package.

KCR2 stand
KCR1 and stand

The KCR2 stand enables the KCR1 to sit at a comfortable angle on a bench to or to be fixed to the wall.

 

 

KCR2 control                                                  £281 £355.20 inc delivery   and V.A.T.   

KCR2 control including thermocouple          £303 ex V.A.T.

 £381.60 inc delivery   and V.A.T.

   

KCR2 stand                                                  £17.00 ex V.A.T.

    
     
  • View Product Image
  • View Information
  • View Specification
click icons for more information
Controls
Kilns